Rotor Kit Demonstrator VT-100
from
Proviso Systems Ltd
Demonstrates most rotating machine faults
The VT-100
demonstration rotor rig has been designed to simulate vibration of
rotating machines and to demonstrate
machine condition monitoring methods. It can be used for factory
acceptance tests of monitoring and diagnostic systems too. Its good
portability is excellent for in-field training purposes.
Using the set the
vibration characteristics of rotating machines with antifriction bearings
can be demonstrated. Different methods of balancing can be demonstrated
and trained.
It is also
possible to simulate unbalanced rotors, coupling misalignment, ball
bearing faults, looseness and other typical machine faults, whilst
allowing the user to demonstrate the capabilities of modern monitoring
instrumentation to collect and analyze vibration measurements.
The demonstrator
contains two identical rotors with ball bearings. The first rotor is
driven by an AC electric motor with a flexible coupling. The
second rotor is driven using a belt to provide variable speeds. An axial
bearing is coupled to the second rotor to allow bearing fault simulation.
Angle scale on
the rotor. Using angle scales allows
easy demonstration of balancing with a strobe light. The
profile of the rotors are prepared for installation of balancing weights.
Ball bearing
faults detection. An axial ball bearing is
coupled to the second shaft. Bearing housing allows adjust the bearing
load. The axial bearing can be dismantled and different faults can be
simulated.
Different
speeds of both shafts allow demonstration of
frequency analysis methods. Very useful is demonstration of strobe light
capability, especially for belt drive faults.
The motor is
equipped with a flexible coupling. It is possible to demonstrate
not only vibration generated by a misaligned coupling, but also vibration
excited by electromagnetic forces.
The VT-100
is delivered complete with a portable hard carry case, power cable, belt,
adjusting tools, and balancing plastic.
Specification
230V 50 Hz 140W,
2730 rpm 1P20
Dimensions
460x 307 x 120 mm,
Weight
7,5 kg (8 kg with
case)
Ordering Information:
VT-100-DEM02
Rotor
Kit Demonstrator with Portable Case
Supplied By:
Proviso Systems Limited
Telephone 01777 817536
Facsimile 01777 816045
Email
sales@proviso-systems.co.uk |
