Thermacam®E45

Analyze problems and share results with your colleagues in the field. Movable crosshairs allow you to measure and analyze the temperature at a single point. Find the hottest spot in a defined area, highlight areas of concern with color alarms. The ThermaCAM E45 has the analysis tools you need to make instant decisions.

The ThermaCAM E45 produces full temperature measurement capabilities on both live and saved images for each of the 19,200 pixels (120 x 160 array). A joystick allows to move the crosshairs over the image. A considerable advantage over having just one fixed spot in the middle of the image.

The ThermaCAM E45 comes with the ThermaCAM QuickView software included. This allows you to do basic post-analysis of your captured IR images and to make simple reports in a PDF-format.

Microsoft Word® based ThermaCAM Reporter™ software is optionally available.

Dust- and splashproof, the E45 meets IP54 standards and withstands harsh industrial environments. Hold the ThermaCAM E45 in your hand. Clip it to your belt or put it in your toolbox. With a weight of less than 700 grams, the E45 is the lightest infrared camera in the world.

If you really want to detect subtle temperature variations that can signal significant problems on moving targets, you need to capture images at a speed of 50 Hz. Capturing images at a lower frame rate results in a disturbed image so that potential problem spots can be overlooked.

The camera stores up to 200 infrared pictures in low density JPEG format, giving you instant visibility of the images stored in the field. Since all images are in JPEG format you can easily share them with your colleagues. There is no need to use special viewing software.SMART POWER MANAGEMENT

The built-in Laser LocatIR™ quickly helps you to associate a hot spot on the IR image with the real physical target. This greatly enhances user safety by eliminating the tendency to ‘finger point’ at problems in low- and high-voltage environments.

At the touch of a button you can easily change colour palettes, emissivity settings, temperature ranges and other analysis tools. Built-in menu systems provide easy access to advanced yet simple to use software.

When doing predictive maintenance inspections, you might end up in situations where you do not have the room to step back. A wide angle range is than the perfect solution. When you are looking at objects which are a distance away you can use a telephoto lens. To ensure perfect images on the LCD display in direct sunlight a sunshield is available.
 

TECHNICAL SPECIFICATIONS

Field of view/min focus distance Typical 19° x 14°/0.3 m (with 17 mm lens)
Thermal sensitivity 0.10°C at 30°C
Image frequency 50/60 Hz non-interlaced
Focus Manual
Detector type Focal Plane Array (FPA), uncooled microbolometer 160 x 120 pixels
Spectral range 7.5 to 13 µm
Optical resolution (with 36 mm lens) 300:1

Video output PAL or NTSC, standard RCA composite video

External display 2.5" color LCD, 16K colors

Temperature range -20°C to +250°C (-4°F to +482°F)

up to +900°C optional

Accuracy ±2°C, ±2%

Repeatability ±1°C, ±1%

Measurement mode Movable spot, area max, area min, area average, isotherm

Menu controls Palettes (iron, rainbow, B&W, B&W inverse), auto-adjust

(continuous/manual)

Set-up controls Date/time, temperature units °C/°F, language, scale, info field,

LCD intensity (high/normal/low)

Measurement corrections Emissivity variable from 0.1 to 1.0, reflected ambient

Type Built-in FLASH memory (up to 200 images)

File formats Standard JPEG

2 x Telescope Typical 9° x 7°/1,2 m (with 36 mm lens)
0.5 Wide angle Typical 34° x 25°/0,1 m (with 9 mm lens)
0,25 Wide angle Typical 60 x 45°/0,1 m (with 4,5 mm lens)

Classification Class 2
Type Semiconductor AIGaInP Diode Laser: 1mW/635 nm red

Type Li-Ion, rechargeable, field replaceable
Operating time 2 hours continuous operation. Display shows battery status
Charging system In camera, AC adapter or 12 V from car (with optional Std. cable)
2 bay intelligent charger, 12 V
AC operation AC adapter 90-260 V AC, 50/60 Hz, 12 V DC out
Voltage 11-16 V DC
Power saving Automatic shutdown and sleep mode (user selectable)

Operating temperature range -15°C to +45°C (+5°F to +113°F)
Storage temperature range -40°C to +70°C (-40°F to +158°F)
Humidity Operating and storage 20% to 80%, non-condensing
Encapsulation IP54, IEC 359
Shock Operational: 25G, IEC 68-2-29
Vibration Operational: 2G, IEC 68-2-6

Weight 700 g (1.5 Ibs.), incl. battery with 17mm lens
Size 265 mm x 80 mm x 105 mm (10.4" x 3.1" x 4.1")
Tripod Mounting 1/4" - 20
Cover case Plastic and rubber

USB Image transfer to PC
RS-232 cable (optional) Image transfer to PC
Video output standard RCA composite video

IR camera, Carrying case, Power supply, Handstrap, Lens cap, ThermaCAM QuickView™ Software,USB cable, User manual, Power cord, Battery (2), Battery charger