ThermaCAM™ P65

Ergonomic and rugged design
The ThermaCAM™ P65 has been designed in cooperation with maintenance professionals who use an infrared camera several hours a day. This has led to a system that is not only very user-friendly but also extremely light and easy to carry. Including battery and LCD display, the ThermaCAM P65 weighs less than 2 kg, making it the lightest full-featured infrared camera on the market.
Designed for use in harsh environments, the ThermaCAM P65 is built to withstand shocks (25G) and vibration (2G). It is dust- and watersplash-proof and carries the industrial IP 54 rating.

Flexible solution
No matter what the situation, the ThermaCAM P65 is always easy to handle. Look at the object through the high-resolution TFT color viewfinder, or carry the camera by its handle while viewing the infrared image on the LCD display. The camera control buttons are always right underneath your fingers. A lamp can be connected to the camera to illuminate dark areas, e.g. when shooting visual images in-door, so that you always produce clear, high-quality visual images to document your inspections. The LCD display, with all necessary remote control buttons, is detachable. It allows you to view images while the camera is positioned in hard-to-reach areas.

Precision temperature measurement Extraordinary image quality
The ThermaCAM P65 delivers unmatched temperature measurement accuracy. A thermal sensitivity of 0.08°C results in clear noise-free images (320 x 240 pixels). A low thermal sensitivity not only offers you the possibility to see the smallest of temperature changes. It also means you get crisp, very detailed high-resolution images which cannot be obtained by less sensitive cameras.

Thermal and visual images Laser pointer
The ThermaCAM™ P65 takes high-definition 14-bit thermal images. At the same time, it records visual images with its built-in digital camera. FLIR Systems has recognized the importance of having a visual image as a reference against the thermal image. Engineers who detect problems with the infrared camera are often not the same people as those who have to repair the defects. The ability to view the environment in which a problem is located on a visual image makes the job a lot easier. With the ThermaCAM P65, all this is done automatically. There is no need to carry separately a digital camera. The integrated Laser LocatIR™, activated at the touch of a button, helps you to safely and quickly associate a hot spot shown on the IR image with the problem area on the physical target.

Sound and color alarms
The operator can set a maximum temperature in the camera. If the P65 is pointed to an object and this temperature is exceeded, the camera will produce an audible and/or visible alarm.

Temperature differential
Calculates the temperature difference between measurement points directly in the field.

Auto hot-spot
The camera will automatically indicate the temperature and the position of the hottest spot in the image.

Record AVI-files
Useful when scanning moving targets such as motors, conveyor belts, ... The camera can record up to 35 seconds of video in an AVI-file. This AVI-file can be replayed in the camera or on a PC for further analysis.

Voice recordings with Bluetooth technology
The camera can store up to 30 seconds of voice comment with each image. A Bluetooth connection allows for wireless connection between the camera and the earpiece with integrated microphone. The wireless earpiece eliminates all cable connections between the operator and the camera, increasing operator safety.

Upload user profiles
No need to re-set all your preferred camera settings one by one if a colleague has used the camera. You can easily upload your own favorite camera settings (color palettes, spots or areas, ...).

Even easier text comments
From now on, you do not need to introduce all fields in the text comments boxes over and over again. Just copy the text comments from one image to another and change only what needs to be changed.

Customize color palettes
Tailor your color palettes to your applications and upload them in the camera.

Internal RAM-memory for burst and AVI recording
The ThermaCAM™ P65 can store up to 600 images on its internal RAM-memory. Radiometric images can be stored at a rate between 25 Hz and 0.5 Hz allowing between 24 seconds and 20 minutes recording time. Ideal when scanning moving targets such as motors, conveyor belts, ... In-camera play-back allows you to view recorded images or sequences without the need to carry a PC. The recorded data can also be easily transferred to a PC for further analysis and editing in the optionally available ThermaCAM Reporter™ software. For those applications that do not require radiometric data, the camera can also record up to 35 seconds of moving images in an AVI-file. No special software needed. Anyone can access these AVI-files.

Intelligent battery system
The battery compartment hides a Li-Ion battery. This type of battery gives the ThermaCAM™ P65 over 2 hours of continuous operation with the LCD and viewfinder running at the same time. The battery can be charged while still in the camera, in a 2-bay battery charger or in your car on the way to the next job. The camera features smart power management functions such as a configurable sleep mode, which increases battery life considerably.

Flexible JPEG image storage
The ThermaCAM™ P65 saves images as fully radiometric JPEGs. These images, together with measurements, plus voice and/or text annotations, are stored either on a removable compact FLASH PC card (256 MB) or in the camera’s FLASH memory. Images can easily be downloaded from the camera using the ThermaCAM QuickView™ software which is supplied as standard.

Intuitive user interface
Control the menus inside the camera with the joystick just as you control your PC with the mouse. Moving crosshairs, calculating temperature differences, isotherms, analyzing line profiles... you can activate all these functions easily.

Easy operation
Conveniently located buttons and a joystick, control all the features of the camera and allow point-and-shoot operation. Functions like autofocus and freezing and storing images, are just a button away. If you want to review images in the camera you can open the “image gallery”. This allows you to browse through thumbnail images and easily find and select the one you need. The laser pointer can be activated by a button underneath your fingertips.

IrDA interface
An infrared interface allows wireless connection to your PC for fast and easy downloading of data from the camera’s internal memory.

LCD display with remote control
Detachable LCD display with user-friendly controls. Includes an innovative, durable joystick and direct-access fingertip buttons.

Viewfinder
The ThermaCAM P65 incorporates a high-resolution TFT color view-finder. Ideal for outdoor use or when the LCD display is not being used.

Direct access buttons
For increased flexibility, the operator can program four buttons located on the side of the ThermaCAM P65. Change color palettes, emissivity settings or temperature ranges. Activate analysis tools such as spots, areas, color alarms... all at the touch of just one button.

LCD data panel
An LCD screen gives you continuous information about the status of specific camera functions. It provides you with information on battery usage, storage capacity, communication status and more.

Laser activator
A conveniently placed button activates the Laser LocatIR™ laser pointer.

Open interfaces
Fast access to composite video connection. Direct connection to charge the battery inside the camera.

Dual storage possibility
JPEG images are stored on removable multimedia Flash cards (256 MB) or in the camera’s internal memory. Images can easily be copied from the camera’s internal memory to the multimedia FLASH Card.

Easy connectivity
USB and RS-232 connections allow fast downloading of full radiometric 14-bit JPEG images. A wireless headset with Bluetooth technology can be connected for voice annotations.

a tool that is adaptable to every situation
The ThermaCAM P65 is designed with a built-in 24° field-of-view lens. This standard optic is suitable for the majority of applications. Sometimes however, you are too far away from the object to make a good measurement. In other cases you cannot get far enough away from the object to capture it in one image. Using an other lens can solve these problems. The ThermaCAM P65 can be used with a complete series of accessory lenses including close-up, wide-angle, telescopic and microscopic lenses to suit the most demanding applications. Apart from lenses, a complete series of accessories is available, including extra battery chargers, extension cables, memory cards and many more.

Automated report generation in a familiar environment
Full radiometric images captured by the ThermaCAM™ P65 can easily be downloaded and integrated in the new ThermaCAM Reporter™ software. This easy-to-use Windows-based software integrates powerful image analysis and report generation functions for fast, accurate evaluation of infrared inspection results. ThermaCAM Reporter allows you to create all your reports in Microsoft Word®. From now on, you can not only make templates for infrared inspection reports in Microsoft Word, but you can also analyze your infrared images within the same program. An extra toolbar on your screen gives you instant access to specific functions for detailed analysis in a familiar environment. Since all images are in JPEG format and all your reports in Word format, you can easily share them with your colleagues or customers. Anyone can open and read your files, with no need to install ThermaCAM Reporter or to use special viewing software

•	Extremely high thermal sensitivity (0.08°C)
•	Unparalleled image quality (320 x 240 pixels)
•	Infrared and visual image
•	Autofocus
•	Text and voice comments
•	Bluetooth
•	Useable in all weather conditions (IP 54)
•	Radiometric JPEG image storage
•	A wide range of accessories and lenses
•	Compatible with ThermaCAM™ Reporter™ software