Proviso Systems Ltd

The Condition Monitoring Experts

Call Me Back

FLIR CM85 Power Clamp Meter Features

VFD Mode

Accurately analyse non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.

Harmonics Mode

Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.

Phase Rotation

Analyse three-phase systems to measure power draw and verify if power is evenly balanced.

Inrush Current

Measure hard and soft start-up inrush current spikes while equipment is ramping up.

METERLiNK Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Power Factor and Active Power

Monitor power quality improvements, such as start-up realignments on three-phase equipment.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

Bright Dual-LED Worklights

Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged & Shock-Resistant

Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

CM85 Power Clamp Specifications

Technical Summary
  Range Basic Accuracy
AC/DC Current 1000 A +/- 2%
AC/DC Voltage 1000 V +/- 1% / 0.7%
AC VFD Voltage 1000 V +/- 1%
Harmonics 1st-25th Order +/- 5%
Total Harmonic Distortion 0.0 to 99.9% +/- 3%
Inrush Current 1000 ACA Max (Integration Time 100 ms) +/- 3%
Active Power 10 kW to 60 kW, (10 V, 5 A min) +/- 3%
Diode Test 0.4 to 0.8 V +/- 0.1V
Capacitance 3.999 mF Max +/- 1.9%
Resistance 99.99 kΩ Max +/- 1%
Continuity Threshold 30 Ω +/- 1%
Frequency 20.00 Hz to 9.999 kHz +/- 0.5%
General Information
Jaw Opening 45 mm (1.77”)
Category Rating CAT IV-600V, CAT III-1000V
Bluetooth Range Max 10 m (32ft)
Battery Type 6 x AAA
Warranty Limited Lifetime

For more information please contact us directly.



CM83 - VFD Mode

CM83 - Inrush Current