FLIR CM78 Industrial Clamp with IR Thermometer Features
AC/DC (1000A or 1000V)
Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.
Non-Contact Safety
Save time by attaching the meter to the target when the panel is de-energised, then measure the active equipment when the panel is closed.
Spot-Laser IR Thermometer
Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.
Type K Thermocouple
Verify that associated current measurements and temperature readings are correctly aligned and in spec.
Bluetooth Connectivity
Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
METERLiNK Compatibility
Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
Bright Dual-LED Worklights
Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
Rugged & Shock-Resistant
Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.
| Technical Summary | Max Range | Basic Accuracy |
| AC/DC current | 1000A | ±2.5% |
| AC/DC voltage | 1000V | ±1.5% |
| Resistance | 40.00MΩ | ±1.5% |
| Capacitance | 4.000mF | ±3% |
| Frequency | 4000Hz | ±1.5% |
| Temperature (IR) | -20 to 518°F, -20 to 270°C | ±2% |
| IR distance to target ratio | 8 inches away : 1 inch spot size | |
| Type K temperature (optional probe) | -4 to 1400°F, -20 to 760°C | ±3% |
| General Information | |
| Bluetooth range max | 32ft (10m) |
| Jaw opening | 1.7in (42mm, 1500MCM) |
| Category rating | CAT IV-600V, CAT III-1000V |
| Warranty | Limited lifetime* |
Ordering Information
CM78:1000A true RMS clamp meter + IR thermometer
CM78-NIST: CM78 with certificate of traceability to NIST
TA80: CAT IV silicon test leads